Inspector II

Design

NEW! Replaces the TM200 and TM400

Introducing the new Inspector II Tint Meter.  1/8th the size and weight of the TM200/TM400/Inspector, the Inspector II has the same features, auto-calibration, and proven accuracy of all Laser Labs, Inc. products.  It works on all windows up to half an inch thick.  Perfect for inspection stations.

Buy

Watch the Video

Functionality

The Inspector II works on all windows.  Holding both sides together, turn them on.  Then put the back meter onto the inside of the window, either holding it in place or using the suction cup.  Put the front meter on the outside of the window over the back meter, and it displays the light transmittance value.

Be sure to avoid placing the detector area over the defrost strips on back windshields.

 

Smaller, lighter, more durable

The Inspector II is far smaller in size than the original TM200/TM400/Inspector but works just as well, with built in protection from false readings and misuse.

The Inspector II is far smaller in size than the original TM200/TM400/Inspector but works just as well, with built in protection from false readings and misuse.

Buy

What's included

  • Two N.I.S.T. traceable reference samples
  • User manual
  • Certificate of Accuracy
  • Carrying case
  • Tint law card

New design, better technology, same functions

The Inspector II is a small, very useful tint meter.  It can measure tint levels on any auto window at any time of day or night.

Make sure to activate the meters BEFORE placing them around windows to avoid misreadings.

The Inspector II is a small, very useful tint meter.  It can measure tint levels on any auto window at any time of day or night.

Make sure to activate the meters BEFORE placing them around windows to avoid misreadings.

LED source

Laser Labs, Inc tint meters use a light at 550nm to measure total light transmittance.

The bandwidth of 50nm spans the general range of visible color.

Laser Labs, Inc tint meters use a light at 550nm to measure total light transmittance.

The bandwidth of 50nm spans the general range of visible color.

Measurement Range

The measurement reads out a value between 0% (opaque material such as cardboard) and 100% (pure air).

All Laser Labs, Inc tint meters are accurate within plus or minus 2% and are not affected by humidity or stray light.  They are reliable from 0º to 100º F, day or night.

Two NIST traceable reference samples are included with each meter.  The lighter sample is high transmittance (65% to 80%), and the darker sample is low transmittance (20% to 35%).

The measurement reads out a value between 0% (opaque material such as cardboard) and 100% (pure air).

All Laser Labs, Inc tint meters are accurate within plus or minus 2% and are not affected by humidity or stray light.  They are reliable from 0º to 100º F, day or night.

Two NIST traceable reference samples are included with each meter.  The lighter sample is high transmittance (65% to 80%), and the darker sample is low transmittance (20% to 35%).

Battery

The Inspector II runs on two CR2032, 3V coin cell batteries which are included. They are good for 4000 uses and have a ten years’ shelf life.  Purchase replacement batteries at your local hardware store, convenience or online store.

The Inspector II runs on two CR2032, 3V coin cell batteries which are included. They are good for 4000 uses and have a ten years’ shelf life.  Purchase replacement batteries at your local hardware store, convenience or online store.

Buy

Technical Specifications

Measurement range                     0% to 100%

Temperature range                       0º to 100ºF (-18 to 38C)

Testing time                                      1 second

Effect of stray light                      Not affected

Power source                                  2 lithium CR2032, 3V battery (included)

Weight                                                3.2 oz. (90g)

Dimensions                                       3.75 x 1.75 x 1.25 in. (95 x 45 x 30mm)